English
简体中文
Product Categories
HEAT ELEMENTS
Ceramic Bobbin Radiant Tube Heater
- Product Details
Radiant Tube Heater Materail: (1)Heating wire
High resistance, no impurities, no segregation, strong antioxidant capacity, no distortion, no breakdown, no loopholes phenomenon in use.
(2)Refractory Material
Use cramic with high-temperature strength and high temperature insulation capability, not broken and drain when work in high temperature.
(3)Protective cover
Choose 1CR25Ni20Si2 covery pipe deformation tiny when partial heat and have no effect on the heating element and the furnace working environment. With strong heat resistance, the normal use time from 6000 to 10,000 hours.
(4) Production crafts
Resistance wire straightening process make sure no cracks. The welding process make sure weld flesh plump smooth, no overheating segregation and Weld phenomenon.
Advantage of Radiant Tube Heater
| (1) Ensure the controllability of the furnace atmosphere; |
| (2) Temperature control, installation and maintenance more convenient, easy to seal; |
| (3) Since no muffle furnace tank, expanding the furnace volume, increased production capacity; |
| (4)Increase heating capacityand heat efficiency; |
| (5) Save material |
| (1)Forbidden over time, over temperature,over load use. |
| (2)High temperature furnace temperature 400 ℃, can not be rapid cooling; |
| (3)Do not touch the charging and discharging radiant tube |
| (4)Pay attention to the operate light, avoid the control switch malfunction and burned radiant tube. |
| (5)Pay attention to the instrument, once find temperature and instrument not normal must be timely analyse and slove. |
|
(6) Furnace over 100KW capacity need equipped phase ammeter in each heating zone. |
|
(1)After Use 3-4months, draw out of the radiant tube, pour the dust of radiation and turn radiant tube 180°C use; |
| (2)Note the positive and negative mark radiant tube, every 3-4 months exchange a positive and negative; |
| (3)When draw out of the tube remove the terminal should be careful, do not hit and percussion lead rods; |
| (4) The lead screw loose wiring folder prone to oxidation should be regularly checked and tightened. |
