English
简体中文
Product Categories
Precision Alloy
Invar 36
- Product Details
Invar 36
*Invar alloy,ASTM F1684,UNS k93600 (FeNi36),Chinese 4J36
Note: A Nickel-Iron, low expansion alloy containing 36% Nickel. It maintains nearly constant dimensions over the range of normal atmospheric temperatures and has a low coefficient of expansion from cryogenic temperatures to about +500°C. Nilo 36 also retains good strength and toughness at cryogenic temperatures. Applications include standards of length, thermostat rods, laser components and tanks and piping for the storage and transportation of liquefied gasses.
Invar Alloys Relative Grade:
| Grade | Russia | U.S.A. | France | Germany | U.K. | |
| 4J32 |
32НКД 32НК-ВИ |
Super-Invar Super Nilvar |
Invar Superieur |
– | – | |
| 4J36 |
36Н 36Н-ВИ |
Invar Nilvar Unipsan36 |
Invar Standard Fe-Ni36 – |
Vacodil36 Nilos36 – |
Invar Nilo36 36Ni |
|
| 4J38 | – |
38NiFM Simonds38-7FM |
– | – | – | – |
Grade & Chemical Composition (see Table 1)
Invar Alloys Chemical Composition
| Grade | Chemical Composition (%) | |||||||||
| C | Si | P | S | Cu | Se | Mn | Ni | Co | Fe | |
| ≤ | ||||||||||
| 4J32 | 0.05 | 0.20 | 0.020 | 0.020 | 0.40～0.80 | 0.20～0.60 | 31.5～33.0 | 3.20～4.20 | Balance | |
| 4J36 | 0.05 | 0.30 | 0.020 | 0.020 | 0.20～0.60 | 35.0～37.0 | Balance | |||
| 4J38 | 0.05 | 0.20 | 0.020 | 0.020 | – | 0.10～0.25 | 0.80 | 35.0～37.0 | – | Balance |
| 4J40 | 0.05 | 0.15 | 0.020 | 0.020 | – | – | ≤0.25 | 32.4～33.4 | 7.00～8.00 | Balance |
Notes:
1、Under condition that the average coefficient of the linear expansion meets the requirements of the standard, the content of nickel and cobalt are allowed to deviate from the stated range.
2、The shape and dimensions of the alloys are in compliance with GB/T14985.
Invar Alloys Physical Property
Table 2 Coefficient of Linear Expansion
| Grade | Heat Treatment of the Samples | Mean Coefficient of Linear Expansion | |
| 20～l00℃ | 20～300°C | ||
| 4J32 | To heat the semi-finished products samples to 840±10°C, hold for 1hour, and quench in the water. Machine the samples to finished samples. And heat at 315±10℃ for 1h, furnace or air cool. | ≤1.0 | |
| 4J36 | ≤1.5 | ||
| 4J38 | |||
| 4J40 | ≤2.0 | ||
Invar Alloys Typical Expansion Coefficient
| Grade | Mean Coefficient of Linear Expansion | |||||
| 20~50℃ | 20～100℃ | 20～200℃ | 20～300℃ | 20～400℃ | 20～500℃ | |
| 4J32 | 0.7 | 0.8 | 1.4 | 4.3 | 7.2 | 9.3 |
| 4J36 | 0.6 | 0.8 | 2.0 | 5.1 | 8.0 | 10.0 |
| 4J40 | 1.4 | 1.3 | 1.2 | 1.7 | 4.5 | |
Note: The data in the tables are just for reference.
Usage: Grade 4J32 and 4J36 are suitable for environmental temperature, make dimensional precision parts for instrumentation. 4J38 are used for easy to cut alloys. 4J40 are used for parts that require low expansion at high temperatures.
Invar Alloys Availiabel Forms
Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
